/ PHX / Crossbar Style European Bar Pull, 8mm Diameter Solid Stainless Steel
Style: PHX
Available in four different sizes, 4.5", 6", 8.5" and 12"; and in grade 304, SOLID stainless steel construction and finish only.
- Modern and contemporary design.
- Horizontal rod has a diameter of 8mm (5/16 inch)
- Make sure you are comparing to the right grade and quality. Our handles are constructed with Ultra Grade SS304 NO RUST Stainless Steel.
- Extremely high quality finish and proven extended durability.
- Easy finger reach. Easy to install. Easy to clean.
- Individually packaged with screws.
- The four different lengths (4.5", 6", 8.5" and 12") are approximation of the overall length. Please double check hole-to-hole size measurement for pull replacement and retrofitting into cabinets with pre-drilled holes.
- Detailed measurements are listed at the bottom of this page.
OUR CHALLENGE: Check the weight of our pulls and compare them to our competitors. If they don't mention the weight, there's a reason why. We do not sell those light weight, low quality pulls.
Style: PHX
Available in four different sizes, 4.5", 6", 8.5" and 12"; and in grade 304, SOLID stainless steel construction and finish only.
- Modern and contemporary design.
- Horizontal rod has a diameter of 8mm (5/16 inch)
- Make sure you are comparing to the right grade and quality. Our handles are constructed with Ultra Grade SS304 NO RUST Stainless Steel.
- Extremely high quality finish and proven extended durability.
- Easy finger reach. Easy to install. Easy to clean.
- Individually packaged with screws.
- The four different lengths (4.5", 6", 8.5" and 12") are approximation of the overall length. Please double check hole-to-hole size measurement for pull replacement and retrofitting into cabinets with pre-drilled holes.
- Detailed measurements are listed at the bottom of this page.
OUR CHALLENGE: Check the weight of our pulls and compare them to our competitors. If they don't mention the weight, there's a reason why. We do not sell those light weight, low quality pulls.
Style: PHX
Available in four different sizes, 4.5", 6", 8.5" and 12"; and in grade 304, SOLID stainless steel construction and finish only.
- Modern and contemporary design.
- Horizontal rod has a diameter of 8mm (5/16 inch)
- Make sure you are comparing to the right grade and quality. Our handles are constructed with Ultra Grade SS304 NO RUST Stainless Steel.
- Extremely high quality finish and proven extended durability.
- Easy finger reach. Easy to install. Easy to clean.
- Individually packaged with screws.
- The four different lengths (4.5", 6", 8.5" and 12") are approximation of the overall length. Please double check hole-to-hole size measurement for pull replacement and retrofitting into cabinets with pre-drilled holes.
- Detailed measurements are listed at the bottom of this page.
OUR CHALLENGE: Check the weight of our pulls and compare them to our competitors. If they don't mention the weight, there's a reason why. We do not sell those light weight, low quality pulls.
4.5" Size | Model #PHX-CX96-E4
6" Size | Model #PHX-D128-E4
8.5" Size | Model #PHX-F192-E4
12" Size | Model #PHX-G3XX-E4
Note
We used a small variety of 18" x 20" (460mm x 510mm) cabinet door fronts to showcase how our hardware would complement the different cabinetry finishes. Although we strive to demonstrate the truest form and colors of our hardware through controlled studio lighting, the photos from our website may or may not display the colors accurately depending on the calibration of colors on your monitor. We highly recommend the purchase of sample(s) to ensure our hardware can be appreciated not just by sight, but also by touch.
Product Details:
4.5" Size | Model #PHX-CX96-E4:
Length 117mm (4-5/8 in)
Diameter of base 012mm (1/2 in)
Diameter of center part of handle 008mm (5/16 in)
Projection 030mm (1-3/16 in)
Hole-to-hole 096mm (3-13/16 in)
Finger Space below bar 020mm (13/16 in)
Net Weight: 94g (3.3 oz)
6" Size | Model #PHX-D128-E4:
Length 150mm (5-7/8 in)
Diameter of base 012mm (1/2 in)
Diameter of center part of handle 008mm (5/16 in)
Projection 030mm (1-3/16 in)
Hole-to-hole 128mm (5-1/16 in)
Finger Space below bar 020mm (13/16 in)
Net Weight: 105g (3.7 oz)
8.5" Size | Model #PHX-F192-E4:
Length 214mm (8-7/16 in)
Diameter of base 012mm (1/2 in)
Diameter of center part of handle 008mm (5/16 in)
Projection 030mm (1-3/16 in)
Hole-to-hole 192mm (7-9/16 in)
Finger Space below bar 020mm (13/16 in)
Net Weight: 130g (4.6 oz)
12" Size | Model #PHX-G3XX-E4:
Length 310mm (12-3/16 in)
Diameter of base 012mm (1/2 in)
Diameter of center part of handle 008mm (5/16 in)
Projection 030mm (1-3/16 in)
Hole-to-hole 288mm (11-5/16 in)
Finger Space below bar 020mm (13/16 in)
Net Weight: 170g (6.0 oz)