/ STL / Curved-Top European Bar Pull, Sand Silver
Style: STL
Available in four different sizes, 6", 7", 9.5" and 12"; and in sand silver finish only.
- Modern and contemporary design.
- Extremely high quality finish and proven extended durability.
- Easy finger reach. Easy to install. Easy to clean.
- Individually packaged with screws.
- Our sand silver finish has an ever-so-slightly textured touch and it doesn't leave fingerprint marks.
- The four different lengths (6", 7", 9.5" and 12") are approximation of the overall length. Please double check hole-to-hole size measurement for pull replacement and retrofitting into cabinets with pre-drilled holes.
- Detailed measurements are listed at the bottom of this page.
OUR CHALLENGE: Check the weight of our pulls and compare them to our competitors. If they don't mention the weight, there's a reason why. We do not sell those light weight, low quality pulls.
Style: STL
Available in four different sizes, 6", 7", 9.5" and 12"; and in sand silver finish only.
- Modern and contemporary design.
- Extremely high quality finish and proven extended durability.
- Easy finger reach. Easy to install. Easy to clean.
- Individually packaged with screws.
- Our sand silver finish has an ever-so-slightly textured touch and it doesn't leave fingerprint marks.
- The four different lengths (6", 7", 9.5" and 12") are approximation of the overall length. Please double check hole-to-hole size measurement for pull replacement and retrofitting into cabinets with pre-drilled holes.
- Detailed measurements are listed at the bottom of this page.
OUR CHALLENGE: Check the weight of our pulls and compare them to our competitors. If they don't mention the weight, there's a reason why. We do not sell those light weight, low quality pulls.
Style: STL
Available in four different sizes, 6", 7", 9.5" and 12"; and in sand silver finish only.
- Modern and contemporary design.
- Extremely high quality finish and proven extended durability.
- Easy finger reach. Easy to install. Easy to clean.
- Individually packaged with screws.
- Our sand silver finish has an ever-so-slightly textured touch and it doesn't leave fingerprint marks.
- The four different lengths (6", 7", 9.5" and 12") are approximation of the overall length. Please double check hole-to-hole size measurement for pull replacement and retrofitting into cabinets with pre-drilled holes.
- Detailed measurements are listed at the bottom of this page.
OUR CHALLENGE: Check the weight of our pulls and compare them to our competitors. If they don't mention the weight, there's a reason why. We do not sell those light weight, low quality pulls.
6" Size | Model #STL-CX96-E6
7" Size | Model #STL-D128-E6
9.5" Size | Model #STL-F192-E6
12" Size | Model #STL-G3XX-E6
Note
We used a small variety of 18" x 20" (460mm x 510mm) cabinet door fronts to showcase how our hardware would complement the different cabinetry finishes. Although we strive to demonstrate the truest form and colors of our hardware through controlled studio lighting, the photos from our website may or may not display the colors accurately depending on the calibration of colors on your monitor. We highly recommend the purchase of sample(s) to ensure our hardware can be appreciated not just by sight, but also by touch.
Product Details:
6" Size | Model #STL-CX96-E6:
Length 145mm (5-3/4 in)
Width of base 011mm (7/16 in)
Width of center part of handle 016mm (5/8 in)
Projection 031mm (1-1/4 in)
Hole-to-hole 096mm (3-13/16 in)
Finger Space below bar 020mm (13/16 in)
Net Weight: 82g (2.9 oz)
7" Size | Model #STL-D128-E6:
Length 178mm (7 in)
Width of base 011mm (7/16 in)
Width of center part of handle 016mm (5/8 in)
Projection 031mm (1-1/4 in)
Hole-to-hole 128mm (5-1/16 in)
Finger Space below bar 020mm (13/16 in)
Net Weight: 99g (3.5 oz)
9.5" Size | Model #STL-F192-E6:
Length 242mm (9-1/2 in)
Width of base 011mm (7/16 in)
Width of center part of handle 016mm (5/8 in)
Projection 031mm (1-1/4 in)
Hole-to-hole 192mm (7-9/16 in)
Finger Space below bar 020mm (13/16 in)
Net Weight: 122g (4.3 oz)
12" Size | Model #STL-G3XX-E6:
Length 306mm (12-1/16 in)
Width of base 011mm (7/16 in)
Width of center part of handle 016mm (5/8 in)
Projection 031mm (1-1/4 in)
Hole-to-hole 257mm (10-1/16 in)
Finger Space below bar 020mm (13/16 in)
Net Weight: 150g (5.3 oz)